Low Pressure Cheminert® PEEK Mixing Tees

VICI Jour SKU: JR-B-CM1XPK

Type: Body Only
Bore: 0.75 mm
Tubing ID: 1/16"
Quote Only

Overview

Designed to create turbulence by the introduction angle of the solvents, these tees mix solvents much more thoroughly than a conventional tee. For use with 1/16" or 1/8" OD tubing, and mountable. PEEK mixing tees are completely inert and biocompatible.

Typically, inverted ferrules are used in these fittings, but the 1/4-28 flat-bottomed details will also accept collapsible ferrule or flanged fittings.

VICI Jour mixing tees are available as the body only, or complete with fittings. A mixing tee with fittings includes:

  • 3 PPS flangeless hex-head nuts
  • 3 ETFE inverted ferrules
  • 3 Color-Sleeve adapters

For 1/16" and 1/8" OD tubing with flangeless connections


Part Material
Body PEEK
Nuts PPS
Ferrules ETFE


Threads:1/4-28 threads

Body Size:

Length 44.45 mm (1.75'')

Height 21 mm (0.83'')

Thickness 9.5 mm (0.37'')


Pressure rating:(varies with tubing material and ID)

≤48 bar (700 psi)

OD Bar Psi
1/16" 105 1500
1/8" 35 500


TECH TIPS

Use our impermeable tubing to avoid gas diffusion in the solvent lines

While mixing tees are typically used with inverted ferrules, collapsible ferrules or flanged connections can also be used

Description Qty/pkg Product No.
1/16" PPS flangeless nuts 10 JR-55070-10
1/8" PPS flangeless nuts 10 JR-55071-10
1/16" Inverted ETFE Ferrules 10 JR-041-10
1/8" Inverted ETFE Ferrules 10 JR-051-10

 

You may also like

Recently viewed